Increase text Decrease text Print this page Email this page

Synchronized Tandem Press Brake

Trapezium bending, starting from flattened trapezium to produce shells ready to be welded.

Tandem Press Brake & Exit Roller Conveyor
Tool for conical polygonal pole & Trazium marked
Shell feeding in Single & Double Shell Welding Machine
Murgesi Press Brake - Depth Throat 2000 mm - Force 2000 ton

OMM provide wide and flexible solutions by its new Synchronized Tandem Press Brake with bending high accuracy and quality, no foundation required, wide range of pole typology production and reduced investment. All these features make very convenient and suitable this machine for poles production plant.

OMM’s Synchronized Tandem Press Brake can easily be operated and carried thanks to its user friendly interface. It's produced with the latest production technologies able to guarantee the best results in term of trapezium bending.

The innovative design of the OMM’s press brake, thanks to the Delem control, makes it possible to manage and synchronize 4 press brakes avoiding the foundation and applying the bending load in uniform way.
The higher number of press brake allows the realization of press brake with higher depth throat and robustness shoulder structure. OMM’s press brakes doesn’t need to rotate the trapezium during the bending phase in order to complete it.

All the process is managed by only an operator for parameters setting and supervisor, is fully automated without any sheet manual manipulation. The sheet management under the press brake is done by the back & front gauge system.

During the bending operation the press brake will apply an opposite force from the bottom to the top direction, thanks to the camber system, that will guarantee a well straightened pole after bending.

OMM supply, together with the press brake, the tools necessary for the production of polygonal and round conical poles. Both tools are designed in order to implement, also in further step, the automatic press brake feeding system and in order to reduce the production change (polygonal versus round pole) time. Those tools have been designed to increase the life time thanks to the usage of the latest material for tools available on the market. In case of wearing, after years of intensive use, OMM’s tools replace only small parts and not the full blades.

Highly recommended to associate this machine to the automatic press brake feeding system for production rate & quality increasing.


- Blank width up to 2000 mm
- Blank length up to 16000 mm
- Depth throat up to 2000 mm (variable)
- Bending force up to 2000 ton
- Trapezium length up to 16 m
- Shoulder structure very robustness
- Uniform load distribution due to the hydraulic cylinders (8 instead of 4)
- Camber system
- Pole ejector system for pole ejection from both sides (for polygonal poles)
- Pole lifting units without matrix damage
- Back & front gauge systems
- Complete tools for polygonal & conical round poles (matrix & die)
- Production rate up to 2 min / pole (i.e. 16 sides pole)
- Simultaneous management up to 4 press brakes thanks to Delem control
- No foundation required
- Presses properly designed for poles
- Real time data monitoring system & teleservice through internet connection
- Only one operator for line management



This machine as all our machines/systems has been designed and manufactured respecting all the norms, in term of safety and respecting the environment ( noise, fumes aspiration, energy recovery back), given by the European Community:

- Conforms to the disposition of the machine directive (2006/42/CE) of 15 January 2016, and following amendments (directive 95/16/CE);
- Conforms to the disposition of the following other directives: directive low voltage (2014/35/UE) of 29 March 2014 and electromagnetic compatibility (2014/30/UE) of 26 February 2014

    Request more information about this product     

Officine Meccaniche Murgesi
World Presence



Steel Poles and High Masts
Standard Dimension 

Read more


Steel Lattice Towers Production Line

Steel Lattice Towers for Power Transmission up to 500 KV / Communication Towers - Square & Triangular / Radio Mast Towers / TV and Aerial Masts / Sub Statiion Structures / Gantries.

Discover steel lattice tower lines


Road Accessories Production Lines
Crash barriers 2 & 3 bumps (as per norms AASHTO, RAL A, RAL B, SINA), colums support, chains, diagonals, belts, culvert and multiplate.

Road accessories production lines