Increase text Decrease text Print this page Email this page

Thesaurus (A - C)


A - C

D - L

M - R

S - Z



Anchor bolts These bolts are cast individually into the pole foundation, and serve to support and secure the pole flange plate.
Anchor plate See Flange plate.
Angle of inclination The angle between the axis of the luminaire connection element and the horizontal.
Angle-bracket ple Pole with one or more angular brackets that form one unit with the pole, or that can be removed.
Angular deviation Deviation of the angle between the centre line of the pole bracket and the centre line of the door opening, from the specified position.
Area of the pole exposed to the wind Area of the luminaire or of the pole that is used for the structural-engineering calculations for the required pole.
Automatic feeding system

The whole of machines (bridge crane, vacuum system, camera, supporting table, marking unit, etc…) able to handle the trapezium blank under the press brake, mark it and manage the automatic alignment and bending.

Automatic press brake feeding system

Base plate A plate tightly mounted to or loosely bolted with the underground pole length, to prevent the pole from sinking into the earth.
Belt Steel component realized as per roll forming process, used to connect (in diagonal) two posts and increase the mechanical property of the crash barriers.

Automatic line for belts and chains production
Bitumen coating Protective bitumen coating on the pole, at or below the ground level.
Blade Component to install on the upper beam of the press brake, used to bend the blank and realize polygonal poles.

Syncrhonized tandem press brake
Bracket The pole attachment, with angular or curved extension.
Bumper As guardrail.

Automatic line for 2 and 3 bumps crash barriers production
Cable entry opening An opening in the underground part of the pole that enables entry of the power cable.
Cable hole See Cable entry opening.
Cable terminal box See fuse box.
Calibration Shaping work performed to a section of the pole (for example, the top end of the pole), to enable it to mount the luminaire.
Cantilever overhang The horizontal interval between the attachment point of the luminaire and the vertical line through the centre point of the pole cross-section at ground level.
CE designation Confirmation of conformity as per DIN EN 40-5 (outside certification), required for delivery throughout the European Union.
Chain Steel component realized as per roll forming process, used to connect (parallel to the floor) two posts and increase the mechanical property of the crash barriers.

Automatic line for belts and chains production
Column support Steel component realized as per roll forming process, “U”, “C” or “Sigma” shaped, as per ASHTOO norms, used for crash barrier support along the road. The component is fitted on the road floor in vertical position and joined to the crash barrier through a mechanical support.

Automatic line for support columns production
Conical pole The whole of products realized by steel blank or pipe, used for : street lighting, cctv system, flag holder, traffic light and sign, etc...

Steel poles e high masts standard dimensions
Single shell welding machine
Conicity The measure of the uniform taper of the mast diameter, for conically round pole models.
Conveyor The whole of products (roller conveyor, chain conveyor, bridge crane, etc...) used for blank handling, shell conveying, pole and shaft convey.
Corrotion protection See Zinc plating, Surface finish, Bitumen coating, Shrink sleeve, Steel sleeve.
Corrugated Blank shaped into alternating parallel grooves and ridges made by press brake or plate bending rollers.

Equipment to produce corrugated multiplates
Crash barrier As guardrail.

Automatic line for 2 and 3 bumps crash barriers production
Crossarm A steel part for mounting the luminaire by curved clamps to the pole top or to threaded connections.
Culverts Pipe through which liquid is carried away. Is made by steel flattened blank that become bended by press brake or plate bending rollers. The final product has some holes/slot for assembly.

Equipment to produce corrugated multiplates
Curved bracket The curved element of the pole, attached to the pole, with a prescribed radius.
Cut to length line Machine to produce flattened trapezium blanks, starting by coils with dimension up to 2100 mm width and 16 m length.

Cut to length line
Cylindrical stepped A stepped-shaped tapering of the pole diameter.


Officine Meccaniche Murgesi
World Presence

Discover


WIDENING
 


Steel Poles and High Masts
Standard Dimension 

Read more